Rabbit L5-2.5L (BGP) (2006)
Transmission Speed Sensor: Service and Repair
Transmission Input Speed (RPM) Sensor G182, Removing and Installing
Transmission Input Speed (RPM) Sensor G182, removing and installing 09G, 6 Speed A/T
Removing
-
Remove valve body.
-
Remove bolt - 1 - of Transmission Input Speed (RPM) Sensor G182
-
Pull sensor out of housing.
Installing
Installation is in reverse order of removal. Not the following:
-
Press sensor into transmission up to stop.
-
Tighten bolt - 1 - of Transmission Input Speed (RPM) Sensor G182, tightening torque. Install valve body.