Rabbit L5-2.5L (BGP) (2006)
Shifter A/T: Procedures
Selector Mechanism Overview
Selector mechanism 09G, 6 Speed A/T
CAUTION! Shift selector lever into position "P" and engage parking brake before working with the engine running.
Selector mechanism overview
1 -
Shift cover with knob
^
Do not remove knob if not necessary. For the emergency release, only the cover must be unclipped.
^
Before removing knob, pull button past pressure point and secure using cable tie or suitable wire. This prevents the button from being pressed
into handle unintentionally.
^
If button is pushed in when knob is removed:
-
Before attaching knob, always pull out button past tangible pressure point
2 -
Selector mechanism with selector lever
3 -
Bolt with spring
^
3 Nm
4 -
Pin
^
Do not grease
5 -
Securing plate
^
Always replace after removal
6 -
Nut
^
9 Nm
^
Qty. 4
7 -
Shift housing
^
With seal
8 -
Selector lever cable
^
Do not grease cable.
9 -
Hex bolt with washer
^
8 Nm