Rabbit L5-2.5L (BGP) (2006)
Clutch Master Cylinder: Service and Repair
Master cylinder, removing and installing 0A4, 5 Speed M/T 0A4, 5 Speed M/T
Special tools, testers and auxiliary items required
^
Pliers T10005
Removing
-
Remove mounting bracket.
-
Disengage master cylinder operating rod mount using pliers T10005.
-
Place spacer - A - between clutch pedal and stop and press clutch pedal toward spacer.
^
Length of spacer = approx. 40 mm (e.g. 1/2 if socket insert)
-
Disengage securing bracket - B - and pull master cylinder out of mounting bracket - arrow 1 - and - arrow 2 -.
Installing
^
Move clutch pedal up to stop in rest position.