Rabbit L5-2.5L (BGP) (2006)
Transmission Position Switch/Sensor: Adjustments
Multi-Function Transmission Range (TR) Switch F125, adjusting 09G, 6 Speed A/T
Special tools, testers and auxiliary items required
^
Adjustment fixture T10173
-
Place selector lever in position "N"
-
Do not kink selector lever cable.
Adjustment requirements:
^
Selector lever cable has been removed from lever/selector shaft.
^
Selector shaft stands in "N" position
^
Mounting bolts of Multi-Function Transmission Range (TR) Switch F125 have been loosened
^
Lever/selector shaft has been removed
-
Attach adjustment tool onto shift rod - 2 - and turn multi-function switch - 1 - until adjustment tool engages on tab of connector at multi-function
switch.
-
Fasten adjustment fixture onto selector shaft - 2 - using bolt - 3 -.
-
Tighten bolts - arrows - to 6 Nm.
-
Remove adjustment fixture.
-
Further installation is in reverse sequence.