Rabbit L5-2.5L (BGP) (2006)
-
Unscrew tank mounting bolts -arrows- and remove tank together with filler tube connecting pipe from vehicle.
Installing:
Install in reverse order of removal, noting the following:
-
Tighten all fasteners according to value in table.
-
Bleed headlamp washer system after completing assembly work.
Tank for windshield washer system and headlamp cleaning system, removing and installing - vehicles with parking heater
NOTE: Depending on equipment, position of individual components may differ slightly from version shown in illustration. Removal is performed in the
same way.
Removing:
-
Switch off ignition, switch off all electrical consumers and remove ignition key.
-
Remove filler tube for tank for windshield washer system and headlamp cleaning system.
-
Remove front bumper cover.
-
Move the lock carrier to the service position.
-
Remove auxiliary heater air intake manifold noise insulation -11-.
-
Unclip bracket of air intake noise damper.