Rabbit L5-2.5L (BGQ) (2008)
Fluid - A/T: Service and Repair
ATF Level, Checking
ATF Level, Checking - 09G, 6 Speed A/T FWD
Please observe notes:
^
About ATF
^
About filling tube
Special tools, testers and auxiliary items required
^
Torque Wrench V.A.G 1331
^
Used oil collection and extraction device V.A.G 1782
^
Vehicle diagnostic, testing, and information system VAS 5051
^
Drip tray for VAS 6100 VAS 6208
^
Adapter for oil filling VAS 6262
^
Adapter VAS 6262/2
If ATF is filled, only use ATF available as a replacement part.
-
If the ATF level is checked, the seal -arrow- of the ATF inspection plug must always be replaced.
ATF Level, Checking
-
Turn off engine.
The ATF temperature must not be more than approximately 30°C at start of test.
^
Transmission not emergency running, ATF temperature not above approximately 30°C
^
Vehicles is horizontal
^
Selector level at "P"
-
Connect tester and move through selections until it is ready for operation.
-
Press right Guided Functions.