Rabbit L5-2.5L (CBUA) (2008)
-
Switch ignition off and remove ignition key.
Remove left or right rear door trim as applicable.
-
Disengage electrical connection lock - arrows - and disconnect.
-
Drill out rivets - arrows - and remove loudspeaker from door opening.
NOTE:
-
To prevent corrosion, ensure that all metal particles from drilling are removed from inside the door.
-
If paint on door frame is damaged during drilling, touch-up immediately.
Installing
Install in reverse order of removal, noting the following:
-
Secure new loudspeaker with special pop rivets of suitable length and diameter.
Rear Bass Speakers, 2 Door
Rear Bass Speakers, 2 Door
NOTE: Removal and installation of left or right side speakers is identical.
Removing
CAUTION:
-
Switch off all electrical consumers.
-
Switch ignition off and remove ignition key.
-
When removing side trim in next step, treble speaker may break away from trim due to a short wire connection from wire mount to
speaker connection. Heed cable length and carefully remove side trim.
Remove left or right rear side trim as applicable.