Rabbit L5-2.5L (CBUA) (2008)
-
Remove bolts - 5 - and - 6 -.
-
Remove bolts - 4 - from below.
-
Unscrew bolts - 3 - and - 2 - (pointing upward) in area of left and right wheel housing liners.
A second technician is required for the rest of the removal procedure.
-
Press left and right retaining hooks - 5 - down - arrow - and with a second technician, remove cover - 1 - parallel from guide profiles.
-
Disconnect harness connectors of installed electrical components and hoses.
Installing
To install, perform the steps used for removal in reverse order.
-
Make sure gaps are parallel and pay attention to gap dimensions 00 Body Panel Gaps