Rabbit L5-2.5L (CBUA) (2008)
Cabin Ventilation Grille: Service and Repair
Intake Air Grille
Intake Air Grille
Removing
-
Remove plenum chamber cover
-
Remove cover - 1 - from plenum chamber.
NOTE:
-
From 11.05.08 with Climatronic, a bracket with an air quality sensor G238 is installed on the intake air grille.
-
Air quality sensor G238 function
-
Release the air quality sensor G238 - 1 - and rotate it to the right to remove it from the bracket.
-
Remove the flange nuts - arrows - (2.5 ± 0.4 Nm) and remove the intake air grille upward.
Installing
Install in reverse order of removal.
NOTE: Seal must be seated correctly on intake air grille.
Assembly sequence:
-
Align the intake air grille on the flange.