Rabbit L5-2.5L (CBUA) (2008)
-
Remove mounting bracket Bearing Bracket
-
Disconnect connector - 5 -.
-
Remove the bolts - 6 -.
-
Disengage cable - 1 - from actuator lever - 8 - and remove door lock - 4 -.
Cover - 3 - is not supplied with delivery casing of door lock.
Installing
To install, perform the steps used for removal in reverse order.
Tightening torques for bolts: 18 Nm.
-
Then a function test must be performed with door open, since the door cannot be opened if release is not correctly adjustment or clipped in.