Rabbit L5-2.5L (CBUA) (2008)
/Page-1680001.png)
Hood Latch Release: Service and Repair
Hood Release, Disconnecting
Hood Release, Disconnecting
-
Open hood.
-
Unclip release coupling - 1 - over headlight on drivers side of lock carrier - 2 -.
-
Open release coupling - 1 - and remove release - 3 - in - direction of arrow - from release coupling.
NOTE:
-
When installing, make sure that release sleeve is inserted correctly and coupling is locked.
-
Before the hood is closed, a function test of the operating lever and release must be performed.
