Rabbit L5-2.5L (CBUA) (2008)
/Page-1699001.png)
Body Emblem: Service and Repair
Name Plates and Emblems
NOTE:
-
Warm the name plates with a hot air gun V.A.G 1416 before removing.
-
Only use adhesive remover D 002 000 10 .
-
Make sure the adhesive surfaces are free of dust and grease.
-
Name plates must be applied immediately after cleaning.
-
Only remove the protective film right before assembly. Processing temperature is approximately 70 degrees F (21 degrees C).
