Rabbit L5-2.5L (CBUA) (2008)
/Page-1722002.png)
Installing
-
Installation is performed in the reverse order of removal.
Cupholder, Highline Center Console
Cupholder, Highline Center Console
Removing
All vehicles
-
Open beverage holder - 1 - and remove two bolts - 2 - (1.5 Nm).
-
Pull cup holder out of center console.
NOTE: When installing, beverage holder must be inserted (first at bottom) into center console while in a closed state. Then it must be opened and
then install the two bolts - 2 -.
