Rabbit L5-2.5L (CBUA) (2008)
-
Unclip cover - 1 - from trim using a small screw driver.
-
Remove bolt - 2 - (1.5 Nm).
-
Pull left footwell trim - 3 - out of mounts.
NOTE: Removal of right footwell trim is identical.
-
Unclip cover - 1 - from trim using a small screw driver.
-
Remove bolt - 2 - (1.5 Nm).
-
Pull left footwell trim - 3 - out of mounts.
NOTE: Removal of right footwell trim is identical.