Rabbit L5-2.5L (CBUA) (2008)
Scuff Plate: Service and Repair
Sill Panel Trim, 4 Door
Sill Panel Trim, 4 Door
NOTE: Removal and installation is described for the left-hand side of the vehicle. Removal and installation for the right-hand side is performed in the
same manner.
Removing
-
Remove rear seat bench
-
Remove 4-door side upholstery:
-
with rear side airbags
-
without rear side airbags
-
Wheel housing trim, 4-door, removing
-
Pull sill panel trim out of front sill panel and door seal tubing.
-
Remove guide - 1 - from lower B-pillar trim.
-
Pull sill panel trim out of rear sill panel and door seal tubing.
-
Remove guide - 2 - from lower B-pillar trim.
-
Open strap - 3 - and feed seatbelt through it.
NOTE: Before installing, check the five securing clips for damage and replace if necessary.
Installing
-
Installation is performed in the reverse order of removal.