Rabbit L5-2.5L (CBUA) (2008)
Installing
-
Installation is performed in the reverse order of removal.
NOTE: Before installing, check securing clips for damage and replace if necessary.
Roof End Strip
Roof End Strip
Removing
-
Open rear lid.
-
Remove roof end strip - 1 - down out of mounts in roof crossmember and rear lid seal molding.
NOTE: Before installing, check securing clips for damage and replace if necessary.
Installing
-
Installation is performed in the reverse order of removal.
Lower A-Pillar Trim, Driver Side
Lower A-Pillar Trim, Driver Side
Removing
-
Disengage sill panel trim from body in lower A-pillar trim transition area.
-
2door
-
4door
-
Remove side instrument panel covers
-
Remove hood operating lever - 1 -
-
Remove clip - 2 -.