Rabbit L5-2.5L (CBUA) (2008)
Installing
-
Installation is performed in the reverse order of removal.
Upper B-Pillar Trim
Upper B-Pillar Trim
NOTE: Removal and installation is described for the left-hand side of the vehicle. Removal and installation for the right-hand side is performed in the
same manner.
Removing
-
Remove airbag emblem - 1 - and remove screw - 2 - (4 Nm).
NOTE: When re-installing, airbag emblem - 1 - must be replaced.
-
Pull trim in lower area out of mounts in body - arrow A -.
-
Remove trim from door seal tubing.