Rabbit L5-2.5L (CBUA) (2008)
Installing
-
Installation is performed in the reverse order of removal.
C-Pillar
C-Pillar Trim
NOTE: Removal and installation is described for the left-hand side of the vehicle. Removal and installation for the right-hand side is performed in the
same manner.
Removing
-
Switch off ignition.
4-door vehicles
-
Remove seat bench.
-
Remove 4-door side upholstery:
-
With rear side airbags
-
Without rear side airbags
2-door vehicles
-
Remove upper B-pillar trim. Belt anchor or belt anchor rail do not need to be removed from front seat belt.
-
Remove seat bench Rear Seat Bench .
-
Remove backrest
-
Remove side trim
All vehicles
-
Remove luggage compartment cover side compartment.
-
Remove roof end strip
-
Remove airbag emblem - 1 - and remove screw - 2 - (4 Nm).