Rabbit L5-2.5L (CBUA) (2008)
-
Disengage release in coupling.
-
In vehicles with charge air cooler, disconnect pressure hoses.
-
Remove signal horn - 4 - with bracket from longitudinal member at right side
-
Unscrew bolts - 3 - at left and right longitudinal members.
-
Install guide rod T 10093 on left and right longitudinal members.
-
Remove bolts - 2 - at left and right on top of lock carrier - 1 -.
-
Lock carrier - 1 - can be pulled toward front approx. 10 cm on guide rod T 10093 .
Service Position, Resetting
To install, perform the steps used for removal in reverse order.
-
Center the lock carrier on the longitudinal members and between the fenders 00 Body Panel Gaps
NOTE:
-
Make sure that pressure hoses for charge air cooler are re-engaged correctly.
-
Hoses and lines must not be pinched.
Pressure Hoses, Releasing
-
Disengage connector coupling - 1 - and disconnect pressure hose - 2 - in - direction of arrow - from coupling.