Rabbit L5-2.5L (CBUA) (2008)
Sunroof / Moonroof Panel: Service and Repair
Sunroof Glass Panel
Sunroof Glass Panel
Removing
-
Remove bellows.
-
Remove mounting bolts - 1 - on left and right sides.
-
Remove glass panel for sunroof - 2 - upward.
CAUTION: Slotted guide rail must not be driven into "opened" position with sunroof glass panel removed because the rain channel is no
longer pressed down by the glass panel and may be wedged in roof.
Installing
The panel must be installed in the neutral position (panel closed).
Neutral Position
Marking - arrow - on upper part of rear guide - 1 - must be located on both sides between markings dimension - a - at slotted guide rail - 2 -.
Link guide - 2 - must be engaged in guide rail (cannot be moved by hand).
If this is not the case, adjust parallel movement
-
Insert glass panel for sunroof - 2 - from above and screw in mounting bolts - 1 -.