Rabbit L5-2.5L (CBUA) (2008)
Power Mirror Switch: Service and Repair
Driver Mirror Adjustment Switch Module
The following components are integrated in mirror adjustment switch module on driver side (depending on equipment):
-
Mirror Adjustment Switch E43
-
Mirror Selector Switch E48
-
Switch for outside mirror heating E231
-
Mirror Folding Switch E263
-
Mirror Adjusting Switch Lamp L78
NOTE: The components listed above cannot be replaced separately.
Removing
-
Remove window regulator switch module on drivers side.
-
Unclip switch installation frame from panel.
-
Disengage retaining tabs - arrows - and remove switch from installation frame.
Installing
Install in reverse order of removal.