Rabbit L5-2.5L (CBUA) (2008)
-
Install sealing ring in brake caliper.
-
Insert the protective cap - A - into the assembly tool T 10146/1 - 1 -.
-
Press the protective cap with the assembly tool - 1 - and the piston resetting tool - 2 - into the brake caliper so that it contacts the brake caliper all
around.
Check Seating of Protective Caps
-
Protective cap must no longer be able to be pulled from brake caliper by hand.
-
Lightly press piston against protective cap with an extension and ratchet adapter - 1 - and hold it there, in that position.
Do not angle piston, to avoid damaging the seal sleeve.
-
Blow the protective cap on with pressurized air (max. 3 bar) - 2 -. Protective cap springs on to piston.