Rabbit L5-2.5L (CBUA) (2008)
-
Use special tool 10165/1 for assistance when installing.
^
For pistons that are difficult to move, an open-end wrench (size 13 mm) can be applied at the appropriate wrench surface - arrow A -
-
Insert brake pad retention plates - arrows - and brake pads in brake carrier.
-
Make sure that the brake pads are located correctly in the anti-rattle springs - arrows -
-
Secure brake caliper using new self-locking bolts.
^
The repair kit includes four self-locking hex bolts which must be installed in all cases.
-
Install wheels.
Note:
^
After replacing brake pads, depress brake pedal firmly several times with vehicle stationary so that the brake pads are properly seated in their
normal operating position.
^
Check brake fluid level after replacing brake pad.
Tightening Specifications