Rabbit L5-2.5L (CBUA) (2008)
Brake Caliper: Description and Operation
Brake Caliper Assembly Overview (Front Brakes FNR-G)
Brake Caliper Assembly Overview (Front Brakes FNR-G)
^
Install complete repair kit when servicing.
^
Only use mineral spirits to clean brake parts.
^
Apply thin coat of assembly paste G 052 150 A2 to brake cylinders, pistons and seals.
1 - Dust cap
^
Install onto bleeder valve
2 - Bleeder valve, 12 Nm
^
Apply a thin coat of assembly paste G 052 150 A2 to the threads before screwing in.
3 - Caps
^
Insert in bushing
4 - Guide pins, 30 Nm
5 - Bushing
^
Insert in brake caliper
6 - Brake caliper
^
Must not be removed
7 - Retaining spring
^
Insert in brake pad retaining spring and press below brake carrier
8 - Brake carrier
^
Bolt to brake caliper
9 - Seal
10 - Piston
^
Apply thin coat of assembly paste G 052 150 A2 to piston before inserting