Rabbit L5-2.5L (CBUA) (2008)
-
Disengage parking brake cable from bracket - 1 - and pull hand brake cable out of guide tube - 2 -.
Installing
-
Slide parking brake cable into guide tube - 2 - and engage it in bracket - 1 -
-
Insert the parking brake cable - 1 - through the opening and then clamp it on the bracket - 2 -.
-
Press the parking brake cable through the bracket on the brake caliper until both retaining tabs - 1 - engage.
-
Press the lever on brake caliper - 2 - in direction of arrow and hook in the brake cable - 3 -.
The parking brake cable must be installed without tension between the bracket on the brake caliper and the bracket on the trailing arm.