Rabbit L5-2.5L (CBUA) (2008)
Connecting Rod Bearing: Specifications
Connecting Rod Bolts .................................................................................................................................................... 30 Nm + 90° (1/4 additional turn)
Replace
Connecting Rod Bearings
Axial play
New .................................................................................................................................................................................................... 0,10 to 0,35 mm
Wear limit ........................................................................................................................................................................................................ 0,4 mm
Radial clearance
New .................................................................................................................................................................................................... 0,02 to 0,06 mm
Wear limit ...................................................................................................................................................................................................... 0,09 mm
Bearing Shells, Installation Location
Bearing shell - 1 - with oil bore - arrow - for connecting rod.
Bearing shell - 2 - without oil bore for connecting rod cover.
-
Place the bearing shells centrally into the connecting rod and connecting rod cap.
Dimension - a - must be the same at left and right.