Rabbit L5-2.5L (CBUA) (2008)
-
Only for vehicles with rough terrain equipment.
-
Only in vehicles with "Showa" condenser.
-
Position protective grate from below on the 3rd rib - arrow -.
2
-
Securing clip
-
Qty. 8
3
-
Condenser
-
Secure to radiator with 4 bolts
4
-
Sealing strips
-
Adhere the upper sealing strips from above onto the 6th row of fins on the condenser before installing.
-
Adhere the lower sealing strips from below onto the 1st row of fins on the condenser before installing.
-
Before assembly, attach side sealing strips to outer edge of condenser.
5
-
Spacer
NOTE: Spacer is only installed in vehicles with gasoline engine.
6
-
Screw
-
5 ± 0.5 Nm
7
-
Radiator
8
-
Screws
-
Qty. 4
-
5 ± 0.5 Nm
NOTE: On vehicles with gasoline engine, first secure bolt - 6 - before bolts - 8 - are secured.
9
-
Fluid reservoir with drier
Under certain conditions, fluid reservoir with dryer is no longer to be replaced after each time the refrigerant circuit is opened.