Rabbit L5-2.5L (CBUA) (2008)
Discharge Air Temperature Sensor / Switch: Service and Repair
Climatronic Temperature Sensors
Left Footwell Vent
Left Footwell Vent
Removing
-
Remove the instrument panel
-
Remove the bolts - 1 - and - 3 - (9 ± 1.3 Nm).
-
Remove bracket - 2 -.
-
Disconnect connector at Left Footwell Vent Temperature Sensor G261 - 1 -.
-
Rotate Left Footwell Vent Temperature Sensor G261 - 1 - 90 degrees and remove from housing.
Installing
Install in reverse order of removal.
Right Footwell Vent
Right Footwell Vent
Removing
NOTE For the sake of illustration, Right Footwell Vent Temperature Sensor G262 is depicted with instrument panel removed. Instrument panel must
not be removed for installation.