Rabbit L5-2.5L (CBUA) (2008)
Brake Light Switch: Service and Repair
Brake Light Switch, from 11.06.05
On vehicles before 11.05.05, brake light switch was located on brake pedal.
Removing
-
Remove engine cover.
-
On some vehicles, intake hose must be removed.
-
Disconnect the connector - 1 - from brake light switch F.
-
Remove bolt - 2 - from brake master cylinder.
-
Pull the brake light switch F - 3 - downward and off from the brake master cylinder and remove it from the retaining tab at the top - 4 -.
Installing
-
Installation is performed in the reverse order of removal.