Rabbit L5-2.5L (CBUA) (2008)
-
Insert Low Beam Headlamp - 1 - into lamp socket so that pin on Low Beam Headlamp fits in recess - arrow - of lamp socket - 2 -.
-
Insert lamp socket with Low Beam Headlamp - 1 - into headlamp and rotate lamp socket with Low Beam Headlamp in - direction of arrow -.
-
Insert cover cap - 1 - into recess on headlamp and tighten cover cap in - direction of arrow -.
-
Check headlamp for function.
-
Check and adjust headlamp aim.
High Beam Bulbs
High Beam Bulbs
NOTE: Illustrations depict replacement of lamp for high beam headlamp at left headlamp.
Removing
-
Switch off ignition, switch off all electrical consumers and remove ignition key.