Rabbit L5-2.5L (CBUA) (2008)
Tail Lamp: Service and Repair
Tail Lamp Adjuster
Tail Lamp Adjuster
NOTE: On vehicles from 11.05, an adjustment element is installed which can be used to adjust the flush dimension to the bumper cover.
Removing
-
Remove tail lamp assembly in side panel
-
Press retaining tabs - arrow A - on adjusting element - 1 - together and press element - 1 - in - direction of arrow B - out of body panel.
Installing:
-
Press adjusting element - 2 - in - direction of arrow - into body panel - 1 - using an SW10 socket until element engages.