Rabbit L5-2.5L (CBUA) (2008)
Tail Lamp: Service and Repair
Rear Lid Tail Lamp Bulb Holder
Rear Lid Tail Lamp Bulb Holder
Removing
-
Switch off ignition, switch off all electrical consumers and remove ignition key.
-
Unclip cover - 1 - in direction of - arrow - from panel.
-
Remove connector - 1 - in - direction of arrow -.
NOTE: Lower trim of rear lid must not be removed. For better depiction, trim of lower rear lid is removed in the following illustration.
-
Turn lamp carrier - 1 - in - direction of arrow - and remove from tail lamp in rear lid.
Installing
Install in reverse order of removal.