Rabbit L5-2.5L (CBUA) (2008)
Safety Circuit Breaker: Service and Repair
Battery Interrupt Igniter
Special tools, testers and auxiliary items required
-
Torque Wrench V.A.G 1331
CAUTION:
-
Observe safety precautions when working on battery isolation system.
-
Observe notes for disposal of battery isolator units
Removing
-
Turn off the ignition and all electrical consumers.
-
Disconnect battery
-
Loosen tensioning strap - 1 - on tool kit and vehicle jack formed insert - 2 - and remove formed insert - 2 -.
-
Open main fuse box catches - arrows - by turning 90 degrees left and fold cover up.
-
Remove collar nut - 2 - and remove line - 1 - from connector threads.
-
Remove self-locking nut - 3 - and remove Battery Interrupt Igniter N253 - 4 - from connector threads while being careful of connected lines.