Rabbit L5-2.5L (CBUA) (2008)
Catalytic Converter: Service and Repair
Front Exhaust Pipe With Catalytic Converter
Front Exhaust Pipe With Catalytic Converter
Special tools, testers and auxiliary items required
-
Torque Wrench V.A.G 1331
-
Hot bolt paste
Removing
-
Remove right underbody trim - arrows -.
Engine Codes BGP and CBTA
-
Unclip wire - arrow -, pull off bracket - 1 - and disconnect harness connector - 2 - for Oxygen Sensor (O2S) Behind Three Way Catalytic
Converter (TWC) G130.
Engine Codes BGQ and CBUA
-
Unclip lines - arrows -, pull off bracket - 2 - and separate connectors - 1 - for Oxygen Sensor (O2S) Behind Three Way Catalytic Converter
(TWC) G130 and - 3 - for Oxygen Sensor (O2S (in Center Three Way Catalytic Converter (TWC), Bank 1 G465.
Continued for all