Rabbit L5-2.5L (CBUA) (2008)
Electronic Throttle Control Module: Service and Repair
Throttle Valve Control Module
Special tools, testers and auxiliary items required
-
Hose clamps up to 25 mm diameter 3094
Removing
NOTE: Observe the rules for cleanliness.
-
Remove engine cover with air filter.
-
Remove intake hose - 4 - between throttle valve control module J338 and air filter. To do so, disconnect air hose - 1 -, if present, and air hose - 2 -
(compress securing ring) and remove spring clamp - 3 -.
-
Remove intake air connection on lock carrier - arrows -.
-
Disconnect connector - 1 - and bleeder hose - 2 -.
-
Remove bolts - arrows -.
NOTE: Seal the intake channel in intake manifold using a clean rag.