Rabbit L5-2.5L (CBUA) (2008)
Transmission Position Switch/Sensor: Adjustments
Multi-Function Transmission Range Switch, Adjusting - 09G, 6 Speed A/T FWD
Special tools, testers and auxiliary items required
^
Headlight washer adjustment tool T10173
-
Place selector lever in position "N".
-
Do not kink selector lever cable.
Adjustment Prerequisites
^
Selector lever cable is removed from lever/shift rod
^
Shift rod is in position "N"
^
Mounting bolts of Multi-Function Transmission Range (TR) Switch F125 are loosened
^
Lever/shift rod is removed
-
Attach adjustment tool onto shift rod -2- and turn multi-function switch -1- until adjustment tool engages on tab of connector at multi-function
switch.
-
Fasten adjustment tool to shift rod -2- using bolt -3-.
-
Tighten bolts -arrows- to 6 Nm.
-
Remove adjustment tool.
-
Further installation is performed in the reverse sequence.