volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Airbag Control Module|Page 287 > < Airbag Control Module|Page 285
Page 1
background image

Air Bag Control Module: Service and Repair
Airbag Module, Driver

Airbag Module, Driver

NOTE:

-

Removal and installation of airbag unit is described for multi-function steering wheel.

-

The screwdriver mentioned in the following should be about 175 mm long and have a blade width of 7 mm.

Removing

CAUTION:  Observe safety precautions for working on airbags.

-

Disconnect vehicle battery

-

Adjust steering wheel height so that it is located in the highest position.

-

Adjust steering wheel depth (reach) so it is in the fully extended position.

-

Turn steering wheel into the position depicted.

-

Insert a screwdriver into hole on rear side of steering wheel until it stops (approx. 8 mm).

-

Turn the screwdriver in the direction of passengers side door - arrow - ; this unlocks the airbag unit locking frame on the right side of the steering
wheel.

-

Turn steering wheel 180 degrees and disengage airbag unit locking mechanism on left side of steering wheel as described.

-

Turn steering wheel back 90 degrees into center position.

-

Remove airbag unit from steering wheel.

Airbag Control Module|Page 287 > < Airbag Control Module|Page 285