Rabbit L5-2.5L (CBUA) (2008)
-
2door
-
4door
-
Remove right trim on seat:
-
Seat without pass-through
-
Seat with pass-through
-
Remove left trim on seat:
-
Seat without pass-through
-
Seat with pass-through
-
Remove bracket and front seat operating lever.
-
If present, remove mount for seat drawer.
-
If present, remove connector - 1 - from Front Passenger's Heated Seat Control Module J132 .
-
If equipped, remove retaining clip - 2 -.
-
Remove retaining clips - 3 -.
-
If present, disconnect connector - 4 - and remove connector from seat frame.
-
Disconnect side airbag connector - 5 - and remove connector from seat frame.
-
Remove line clip - 6 - and disconnect backrest wiring harness from seat frame.