Rabbit L5-2.5L (CBUA) (2008)
-
Switch on ignition.
-
Connect vehicle battery.
Passenger Occupant Detection System Components, Power Seats
Passenger Occupant Detection System Components, Power Seats
NOTE:
-
Passenger Occupant Detection System (PODS) controls automatic passenger airbag deactivation.
-
This equipment is only installed on vehicles released in the USA.
CAUTION: Observe safety precautions when working on seat occupied recognition.
NOTE:
-
Seat cushion, mat for seat occupied recognition, control module and pressure sensor must only be replaced together. Components are
complementary and must not be separated.
-
Only disconnect wiring harnesses mentioned in the following description.
-
Mount the fixture for seat repair VAS 6136 on the engine and transmission holder VAS 6095 .
-
Remove front seat.
-
Attach the seat to the fixture for seat repair VAS 6136 .
-
Remove front belt latch:
-
2door
-
4door
-
Remove right trim on seat.
-
Remove left power seat trim.
-
If present, remove seat drawer mount
-
Remove retainer and power seat bracket