Rabbit L5-2.5L (CBUA) (2008)
Seat Belt Latch: Service and Repair
Belt Latch, 4 Door
Belt Latch, 4 Door
NOTE: Removal and installation is described for belt latch of left seat. The same instructions apply for removal and installation for belt latch of right
seat.
Removing
-
Remove front seat
-
Position seat as far forward as possible.
-
If present, disconnect wiring harness from seat frame.
-
Remove bolt - 1 - (20 Nm).
NOTE:
-
The screw is micro-encapsulated and must be replaced every time it is loosened.
-
Before new bolts are installed, the thread of the corresponding nut must be cleaned.
-
Remove belt latch - 2 - from mount in seat rail - arrow -.