Rabbit L5-2.5L (CBUA) (2008)
Seat Occupant Sensor: Service and Repair
Components, Adapting
Components, Adapting
-
Vehicle Diagnosis, Testing and Information System VAS 5051
-
Diagnostic cable VAS 5051/1 or VAS 5051/3
Select "Guided Fault Finding" on vehicle diagnosis, testing and information system VAS 5051 .
After all control modules have been interrogated:
-
Press "Go to" button
-
Select "Function/Component selection"
-
Select "Body"
-
"Body Repairs"
-
Select "01 - On Board Diagnostic (OBD) capable systems"
-
Select "Airbag"
-
Select "Functions"
-
Select "Action"
Front Passenger Seat Occupied Sensor
Front Passenger Seat Occupied Sensor
CAUTION: If Front Passengers Seat Occupied Sensor G128 is replaced, also the upholstery, front seat cushion must always be replaced.
Removing
-
Mount the fixture for seat repair VAS 6136 on the engine and transmission holder VAS 6095 .
-
Remove front seat
-
Attach the seat to the fixture for seat repair VAS 6136 .
-
Remove front right seat trim
Vehicles with manual seat adjustment
-
Remove front left seat trim
-
Remove bracket and front seat operating lever
Vehicles with electric seat adjustment
-
Remove left power seat trim
-
Remove retainer and power seat bracket
All vehicles
-
Remove front seat drawer mount
NOTE: On vehicles with a luggage pass-through, it is sufficient to fold the backrest forward, it does not have to be removed.
-
Remove front seat backrest
-
Remove cover and upholstery from front seat backrests