Rabbit L5-2.5L (CBUA) (2008)
Headlamp Switch: Service and Repair
Light Switch
The following components are integrated with Light Switch E1:
-
Fog Lamp Switch E7
-
Rear Fog Lamp Switch E18
-
Headlamp Switch Light L9
Removing
-
Turn off the ignition and all electrical consumers.
-
Turn light switch rotary knob to "0" position.
-
Push in light switch rotary handle - 1 - and turn it slightly toward right - 2 -.
-
Hold rotary handle in this position and remove light switch on rotary handle from instrument cluster - 3 -.
-
Disconnect electrical connection - arrow -.
Installing
-
Connect the connector to the light switch.
-
Hold light switch firmly and press in rotary handle of light switch - 1 - and turn slightly toward right - 2 -.
-
Hold rotary handle in this position and insert light switch into instrument cluster - 3 -
-
Turn rotary handle to position "0", release and engage switch.