Rabbit L5-25L (CBUA) (2008) Seat Occupant Sensor - Service and Repair
1
-
Front seat wiring harness
2
-
Seat frame
3
-
Seat Occupied Recognition Control Module J706
4
-
Upholstery of front seat cushion
-
Must not be separated from mat for seat occupied recognition
5
-
Seat Occupied Recognition Mat
-
Must not be removed from pressure hose and upholstery of front seat cushion
6
-
Insertion profile
-
Note location
7
-
Bracket
-
White
Passenger Occupant Detection System Components, Manual Seats
Passenger Occupant Detection System Components, Manual Seats
NOTE:
-
Passenger Occupant Detection System (PODS) controls automatic passenger airbag deactivation.
-
This equipment is only installed on vehicles released in the USA.
CAUTION: Observe safety precautions when working on seat occupied recognition .
NOTE:
-
Seat cushion, mat for seat occupied recognition, control module and pressure sensor must only be replaced together. Components are
complementary and must not be separated.
-
Only disconnect wiring harnesses mentioned in the following description.
-
Mount the fixture for seat repair VAS 6136 on the engine and transmission holder VAS 6095 .
-
Remove front seat.
-
Attach the seat to the fixture for seat repair VAS 6136 .
-
Remove front belt latch: