Rabbit L5-2.5L (CBUA) (2008)
Washer Fluid Level Switch: Service and Repair
Windshield Washer Fluid Level Sensor
NOTE: Depending on equipment, the component location of the Windshield Washer Fluid Level Sensor G33 may deviate slightly from the illustrations.
Removal is performed in the same way.
Removing
-
Switch off ignition, switch off all electrical consumers and remove ignition key.
-
Remove front bumper cover.
-
Disconnect harness connector - 1 - on Windshield Washer Fluid Level Sensor G33.
-
Pull Windshield Washer Fluid Level Sensor G33 - 2 - out of its rubber seal.
-
If necessary, collect the draining fluid in a suitable container.
Installing
Install in reverse order of removal, noting the following:
-
Bleed headlamp washer system after completing assembly work.