Rabbit L5-2.5L (CBUA) (2008)
Battery Cable: Service and Repair
B+ Cable Mount on Generator
CAUTION:
When disconnecting and connecting battery, the procedure must be followed as described in the Repair Information.
If the B+ wire is not tightened to the specification, the following may occur:
-
Battery will not be completely charged.
-
The complete electrical/electronics systems may fail (disabled vehicle).
-
Fire hazard due to arcing.
-
Damage to electronic components and control modules caused by excessive voltage.
-
Tighten the B+ wire nut - arrow - to 15 Nm.