Rabbit L5-2.5L (CBUA) (2008)
Relay Box: Service and Repair
Relay Carrier With Fuse Holder Under Left Instrument Panel
Relay Carrier With Fuse Holder Under Left Instrument Panel
CAUTION: When disconnecting and connecting battery, the procedure must be followed as described in the Repair Information.
Removing
-
Disconnect battery
-
Remove storage compartment on driver side
-
Remove relays - arrows - from relay carrier.
NOTE: The number of relays is dependent on vehicle equipment.
-
Clip retaining tabs in - direction of arrow - outward and then press connectors - 1 - through relay carrier.
-
Release retainer - 1 - for relay panel in direction of - arrow - and remove relay panel.
Installing
Install in reverse order of removal, noting the following:
-
First clip connector into relay carrier.