Rabbit L5-2.5L (CBUA) (2008)
-
Grease steering rack on toothed side -A- and on thrust piece side with grease G 052 192 A1.
-
Turn steering wheel into straight ahead position.
-
Guide new clamp and boot on to tie rod.
-
Screw in tie rod until marking applied during removal is reached.
-
Tighten lock nut -3- to tightening torque, counterhold on tie rod end -2- while doing this.
-
Slide boot -2- on to tie rod -1- as depicted in the illustration.
-
Secure spring clamp on boot using hose clamp pliers V.A.G 1275.
-
Push boot all the way onto the steering gear housing.
-
Tighten new clamp using locking pliers VAS 6199 to the extent depicted in the illustration.
Further installation is in reverse sequence to removal.