Rabbit L5-2.5L (CBUA) (2008)
-
Grease steering rack on toothed side -A- and on thrust piece side with grease G 052 192 A1.
-
Turn steering wheel into straight ahead position.
-
Slide boot onto tie rod.
-
Twist tie rod far enough into tie rod end until dimension -a- is obtained.
Dimension -a- = 371 ± 1 mm
-
Guide new clamp and boot on to tie rod.
-
Twist tie rod into steering gear and tighten to tightening torque.
-
Position boot -2- on tie rod -1-.
-
Slide boot on to steering gear housing until it stops.