Rabbit L5-2.5L (CBUA) (2008)
Ball Joint: Testing and Inspection
Ball Joint, Checking
Axial play, checking
-
Pull control arm firmly downward in direction of -arrow- and press back up again.
Radial clearance, checking
-
Press wheel firmly in and out at bottom in direction of -arrow-.
Note:
^
There should not be any noticeable or visible "play" in either of the two checks.
^
Observe lower ball joint while performing checks.
^
Make allowance for any wheel bearing play or "play" in strut mounting at top.
^
Check rubber boot for damage, replace lower ball joint, if necessary.