Rabbit L5-2.5L (CBUA) (2008)
Control Arm Bushing: Service and Repair
Control Arm Bonded Rubber Bushing
Control Arm Bonded Rubber Bushing
Special tools, testers and auxiliary items required
^
Tube T10219/1
^
Drift T10219/2
^
Thrust plate VW 402
^
Punch VW 411
Bonded rubber bushing, pressing out
-
Press out bonded rubber bushing, as depicted in illustration.
1 Punch VW 411 Tube T10219/1 Thrust plate VW 402
Bonded rubber bushing, pressing in
Bonded rubber bushing must be installed at an angle to avoid damage when pressing in. When pressing in, bonded rubber bushing will straighten itself
out.
-
Apply installation lubricant G 294 421 A1 on outer bonded rubber bushing.
-
Attach bonded rubber bushing at an angle (in direction of control arm), lip -arrow- must slip into opening as depicted in illustration.
1 Drift T10219/2 Tube T10219/1 Thrust plate VW 402